Laser cutting machine is widely used in industry. It can cut metal and nonmetal, thick material and thin material. But according to the different parts of laser equipment, the material of the machine will be different. There are many types of ordinary laser machine. The biggest difference between them is the processing area and laser tube power. Another important equipment is laser lens. In fact, some of the accessories with a set, you are equal to a switch on oh. Let me tell you a case:
There was a leather factory customer to buy laser equipment, they are mainly used for proofing, the volume will not be too much. Although they are a large factory, their purchase is very considerate for the company. They hope to meet the requirements of both cutting tool template and cutting leather proofing with the least cost. Later, I gave him a way to get the best of both worlds, that is, to order only one set of equipment with high power and suitable for cutting the template. Then, some parts of the equipment will be equipped with a set that can be used to cut leather. In fact, in addition to the laser tube power is larger than the leather cloth cutting machine, the other biggest difference lies in the laser head inside the aggregation lens equipment and mesh plate selection. If the knife template is thick, the lens with long focal length must be used, and the lens with short focal length should be used for thin leather. There are also mesh panels. The cutter template is usually equipped with blade mesh with good ventilation, while leather cloth is honeycomb mesh plate which can keep the table surface level. So I gave him the suggestion that he order a laser equipment with large area and power, and an additional lens and a set of mesh plate. In this way, they not only save the cost, but also save the storage space of the equipment. One machine can be used for two purposes, with both thickness and thickness.
For more information about laser tube and laser tube manufacturer of Shanghai Shanpu Laser Technology Co., Ltd., please contact editor.