Laser engraving machine in the use of the process, its component replacement rate is the largest carbon dioxide laser tube, its service life is generally in 3000 to 7000 hours.
The service life of carbon dioxide laser tube is related to the depth of engraving or cutting and cutting or carving. When replacing, you should first look at the type of carbon dioxide laser tube and the laser power of your machine. After determining the above parameters, you can know how many watts your machine is. After finding the corresponding CO2 laser tube, please follow the following steps to replace the CO2 laser tube:
1、 The original old carbon dioxide laser tube polarity line welding.
2、 Take off the fixed fixture carefully, and finally put the new carbon dioxide laser tube in place and connect the wire head
3、 With 704 glue, the thread head is fully insulated from CO2 laser engraving machine.
The above is the laser engraving machine replacement of carbon dioxide laser tube method, hope to help you!